What to Think About First
The roof does more for a treehouse’s character than anything else, but in a tree it also has to cope with a few special demands:
- Weight: every kilo is carried by the tree, so lighter roofs are generally better
- Wind: roofs catch wind, and a treehouse is exposed, so the roof has to be well fixed against uplift
- Leaves and debris: falling leaves, twigs and seeds collect on roofs and in gutters
- The tree itself: branches or a trunk may need to pass through the roof
- Maintenance: you’ll be working at height to repair it, so durable, simple roofs save trouble
Roof Shapes
Pitched (Gable) Roofs
Two slopes meeting at a ridge: the classic “house” shape.
- Pros: sheds water and leaves well, gives headroom in the middle, and has a traditional, storybook look
- Cons: more framing than a lean-to, and steep pitches catch more wind
- Good for: cottage-style and cabin treehouses
Lean-To (Mono-Pitch) Roofs
A single slope from one side to the other.
- Pros: simple to frame, light and modern-looking. Water runs off one edge, where a gutter is easy to fit
- Cons: less headroom on the low side; very shallow slopes need a roofing material rated for low pitches
- Good for: first builds, modern designs and small playhouses
Hipped and Pyramid Roofs
Slopes on all sides, meeting at a ridge or a point.
- Pros: attractive on square or octagonal treehouses, and generally good in wind
- Cons: more complex angles to cut and more joints to waterproof
- Good for: single-tree platforms with the cabin centred on the trunk
Curved and Arched Roofs
Curved rafters, often laminated or cut from sheet material, covered with flexible roofing.
- Pros: distinctive, organic look that suits trees
- Cons: harder to frame; needs a roofing material that bends, such as EPDM, metal sheet or shingles on a flexible deck
- Good for: design-led builds
Living (Green) Roofs
A waterproof layer topped with drainage, growing medium and plants, often sedum.
- Pros: beautiful, blends into the canopy, good for wildlife and helps insulate
- Cons: heavy, especially when saturated. Even shallow sedum roofs can add substantial weight per square metre once wet, which a tree may not be able to carry safely. They need a robust waterproofing layer, edge details and occasional maintenance
- Good for: treehouses supported mainly on posts, or a small, well-engineered structure. Check the system’s saturated weight with the supplier and have the structure checked if in doubt
Roofing Materials Compared
| Material | Weight | Notes |
|---|---|---|
| Felt (bitumen) shingles | Light–medium | Common on playhouses; needs a solid board deck and a minimum pitch set by the manufacturer |
| Roofing felt (rolls) | Light | Cheap; shorter-lived than other options |
| EPDM rubber membrane | Light | Durable, suits low pitches and curves, and good around trunk penetrations |
| Corrugated metal sheets | Light | Durable and sheds leaves well; can be noisy in rain |
| Corrugated bitumen sheets | Light | Easy to cut and fix; budget option |
| Clear polycarbonate | Light | Lets in light and canopy views; can get hot and gather dirt |
| Cedar shingles or shakes | Medium | Beautiful and natural; needs adequate pitch and ventilation |
| Living/sedum roof | Heavy | See above; mainly suited to post-supported structures |
| Tarp or canvas | Very light | Quick and temporary; replace often |
Always check the manufacturer’s minimum pitch and fixing instructions. A roof that’s too shallow for its covering will leak.
Dealing With a Trunk or Branch Through the Roof
Letting a trunk rise through the roof looks wonderful, but it’s the hardest detail to keep dry, because the tree grows and moves.
- Leave a generous gap around the trunk. Family Handyman suggests around 3 in (about 7.5 cm) where a trunk passes through a roof, more than for floors
- Seal with a flexible collar, for example a loose skirt of EPDM rubber fixed to the roof and gathered loosely around the trunk above the opening, so water is shed outwards. It should never be tight against the bark
- Don’t fix rigid flashing to the tree
- Inspect and loosen the collar as the trunk grows
A simpler alternative is to keep the roof clear of the trunk and let branches pass around the outside of the structure.
Framing Tips
- Build rafters or roof panels on the ground, then lift them up. It’s quicker and safer
- Fix the roof down firmly with rafter ties or straps, because wind uplift can be significant on an exposed treehouse
- Tie the walls together at the top so a pitched roof doesn’t push them apart
- Use a solid board deck (exterior plywood or OSB rated for roofing) under shingles or membranes
- Leave ventilation where needed, especially if you plan to insulate the treehouse
Adding a Roof to an Open Platform
Many treehouses start as open decks and get a roof later. Common approaches:
- Extend the railing posts upwards (or replace them with taller posts) and frame a roof on top. Make sure the posts are strong and well fixed. See treehouse railings
- Add a lightweight lean-to over part of the deck
- Use a canvas or sail shade as a temporary roof
Remember the extra load on the tree, and the extra wind catch, especially in a single-tree platform. See tree deck plans for one tree.
Gutters, Drips and Overhangs
- Overhangs of a reasonable size protect walls and windows from rain
- Gutters fill with leaves quickly under trees. Use leaf guards, or skip gutters and let water drip onto a gravel or bark area away from the entrance
- Plan where water goes, away from the ladder, stairs and deck, where drips make surfaces slippery
For the bigger design picture, see how to design and build a beautiful treehouse.