Design and Building

How to build a stilt house?

How to build a stilt house: foundation and post options, a step-by-step guide for small raised structures, bracing, slopes, building near trees and costs.

On this page
  1. The Short Answer
  2. Why Build on Stilts?
  3. Small Stilt Structures vs Stilt Homes
  4. Foundation and Stilt Options
  5. Step by Step: Building a Small Stilt Structure
  6. Building on a Slope
  7. Building Stilts Near a Tree
  8. How Expensive Is It to Build on Stilts?

The Short Answer

To build a stilt house, you:

  1. Plan the structure and check permissions
  2. Set out post positions accurately
  3. Build footings (concrete pads, piers or screw piles) on firm ground
  4. Stand the posts on the footings and make them plumb
  5. Fix beams across the posts at the right height and level
  6. Brace the posts diagonally in both directions so the structure can’t sway
  7. Add joists and a floor, then railings
  8. Build the house on top of the platform

That sequence works for small structures such as playhouses, treehouses on posts and garden studios. A stilt house that people will live in needs a structural engineer’s design and building regulations approval. The principles are the same, but the loads, foundations and rules are far more demanding.

Why Build on Stilts?

People raise buildings on stilts to:

  • Stay above water or flood levels, on lakes, rivers and flood-prone land
  • Build on a slope without major digging
  • Avoid damp ground and improve airflow under the floor
  • Get a view, or the feeling of a treehouse without using a tree
  • Reduce ground disturbance, for example near tree roots

For treehouse builders, stilts are the answer when no tree is strong enough, or to support part of a treehouse so the tree carries less load.

Small Stilt Structures vs Stilt Homes

Small structure (playhouse, treehouse, deck) Stilt home
Design DIY plans, a kit or a builder’s experience Structural engineer
Foundations Concrete pads, posts in concrete or screw piles Engineered piers or piles
Rules (UK) Often planning only; usually outside Building Regulations if small and with no sleeping accommodation Full planning permission and Building Regulations
Typical DIY? Yes, with care Rarely, without professional input

The rest of this guide focuses on small structures.

Foundation and Stilt Options

Concrete pads with post bases. Dig a hole, fill it with concrete, and fix a galvanised post base on top, either cast in or bolted on afterwards. The timber post sits in the base, with its end grain held clear of the concrete so it can dry. It’s tidy, and posts are easy to replace.

Posts set in concrete. The post goes into the hole and concrete is poured around it. It’s simple and stiff, but the post tends to rot at ground level eventually and is hard to replace. If you do this, use ground-contact treated timber and shape the concrete top so water runs away from the post.

Screw piles (ground screws). Steel screw piles are driven into the ground with a machine or by hand, with no concrete needed. They’re quick and suit sites where you want minimal digging, but check the supplier’s load ratings for your soil.

Concrete or block piers. Taller piers can raise timber posts higher above damp ground. They’re common on slopes.

Steel posts. These are used on some larger or more modern designs and are usually engineered.

Footing size and depth depend on soil, load and climate. They need to sit on firm, undisturbed ground below the topsoil, and deep enough that frost or shrinking clay soils won’t move them. For light play structures, many builders use footings a little over half a metre deep, but check local guidance and your plan.

Step by Step: Building a Small Stilt Structure

1. Plan and Check Permissions

Draw the platform size and height, post positions and access. In England, raised platforms more than 30 cm high generally fall outside permitted development, so talk to your local planning authority. See our treehouse plans guide for UK permission basics.

2. Set Out the Posts

Mark the corners with pegs and string lines. Check the diagonals are equal so the layout is square. Larger platforms need intermediate posts so beams don’t span too far.

3. Dig and Pour Footings

Dig the holes, check depth, and pour concrete. If you’re using post bases, set them in line with a string and check they’re square to each other. Let the concrete cure before loading it.

4. Stand and Plumb the Posts

Fix the posts to the bases and use temporary diagonal props to hold them plumb (vertical) on two faces.

Post size: guidance from one specialist treehouse supplier suggests around 10 x 10 cm posts for light children’s playhouses, 12 x 12 cm for typical treehouses and larger for heavy loads, with longer posts needing to be thicker. Follow your plan where it specifies sizes.

5. Fix the Beams

Mark the beam height on every post with a laser or water level, then bolt the beams to the posts. A common detail is a pair of beams, one either side of the posts, through-bolted. Notching the posts so the beams bear on a ledge reduces the load on the bolts.

6. Brace in Both Directions

This is the step people underestimate. Posts on their own can rack: the whole structure leans and sways sideways like a parallelogram. Diagonal braces from each post up to the beams, in both directions, turn the frame into stiff triangles. Specialist guidance generally recommends bracing posts longer than about a metre.

7. Joists, Floor and Railings

Fit joists across the beams, often at 400 mm (16 in) centres, with hangers or rated screws, then lay decking or plywood. Fit railings straight away. For more detail, see how to build a treehouse platform step by step.

8. Build on Top

Fix a playhouse kit down to the platform, or frame your own walls and roof. See how to build a Wendy house or cubby house on stilts and treehouse roof options.

Building on a Slope

Stilts work well on slopes. Posts on the downhill side are longer, which means:

  • Longer posts need to be thicker and better braced
  • Footings on the downhill side should be checked for erosion. Direct roof water away from them
  • Steep or unstable slopes need professional advice

Building Stilts Near a Tree

If your stilt structure stands near a tree, or supports part of a treehouse:

  • Keep footings away from the trunk. One treehouse hardware supplier recommends at least 1.5 m from the tree to avoid cutting major roots
  • Dig by hand near trees, and avoid cutting large roots
  • Don’t pile soil or materials over the root area
  • Allow for movement where a post-supported structure connects to a tree, because the tree sways and the posts don’t. See building a treehouse between two trees: allowing for movement

How Expensive Is It to Build on Stilts?

For small structures, stilts add the cost of posts, concrete or screw piles, post bases, bolts and bracing timber, plus digging time. That’s usually modest compared with the cost of the building on top. For stilt homes, engineered foundations, extra insulation under the floor and access stairs can make them more expensive than building on a conventional foundation, though on difficult sites they can save on excavation. Get quotes based on a specific design.

For timber choices for posts and bracing, see the best timber for a treehouse.

The complete guide to design and building

How to Design and Build a Beautiful Treehouse
Read the guide

Keep exploring

Guides from other topics

All topics →