Design and Building

Treehouse Fixings and Accessories: Bolts, Brackets, Swings and More

A guide to treehouse fixings and accessories: tree bolts, brackets, slings, frame hardware, swings and slides, plus buying tips for the UK, Ireland and Canada.

On this page
  1. Structural Fixings vs Accessories
  2. Treehouse Attachment Bolts
  3. Brackets That Work With Tree Bolts
  4. Slings and Cables
  5. General Fixings for the Frame
  6. Fixings to Avoid
  7. Fun Accessories
  8. Hanging a Swing Safely
  9. Buying Treehouse Fixings in the UK, Ireland and Canada

Structural Fixings vs Accessories

Treehouse hardware falls into two groups:

  • Structural fixings hold the treehouse to the tree and hold the frame together. Get these right, because the safety of the whole structure depends on them.
  • Accessories such as swings, slides, rope ladders, pulleys and lights make it fun. Many of them still carry dynamic loads, so they need proper fixings too.

Treehouse Attachment Bolts

A treehouse attachment bolt (often called a TAB, a tree bolt or a limb) is a specialist fixing designed for living trees. A typical one has:

  • A coarse thread that screws into a pre-drilled hole in the trunk
  • A wide collar that bears against the wood and spreads the load
  • A long, smooth shaft that sticks out from the trunk, which the beam sits on

Because the beam sits out on the shaft rather than pressed against the bark, the tree can keep growing outwards without being squeezed. Over the years, the tree may grow around the collar.

Manufacturers sell bolts in different sizes and load ratings. Use the product’s own rating and installation instructions, including the drill bit size and depth, rather than general rules. Most need a fairly large trunk; around 30 cm (12 in) diameter at the fixing point is a commonly quoted minimum, though requirements vary by product and species.

Tree bolts cost much more per piece than ordinary coach screws, but a well-designed treehouse uses only a few. For how they fit into the bigger picture, see how to attach a treehouse to a tree without harming it.

Brackets That Work With Tree Bolts

Most tree bolt systems have matching brackets:

  • Fixed brackets or saddles hold a beam firmly on the bolt.
  • Floating (sliding) brackets let a beam slide along a slot as the tree sways. They’re essential when one platform spans two trees that move independently.
  • Knee brace brackets take the bottom end of an angled brace, which is useful on single-tree platforms.
  • Cable eyes or hanger brackets let you attach suspension cables to a bolt.

Use brackets designed for the bolt you’re using. Mixing parts from different systems can leave you with poor fits and unknown load capacities.

Slings and Cables

Wide tree slings (similar to those used in tree care) wrap around a strong limb or fork and connect to a steel cable that supports part of the structure. Adjusters such as turnbuckles let you fine-tune the height.

They have their uses, especially for light structures, suspension bridges and extra support, but:

  • They need regular inspection and replacement according to the manufacturer’s guidance
  • Suspended structures can swing in wind
  • Narrow ropes, wire or chains wrapped directly around a limb can damage the bark and girdle the branch as it grows. Use purpose-made wide slings only

General Fixings for the Frame

The rest of the treehouse uses familiar outdoor building hardware:

  • Coach bolts and nuts with large washers for bolting beams together and fixing braces
  • Structural timber screws, rated for the job, which can replace many bolts in modern framing
  • Joist hangers to fix joists to beams
  • Restraint straps or hurricane ties to stop joists lifting or twisting
  • Post bases to hold posts above concrete footings
  • Decking screws rated for outdoor use and treated timber

For corrosion resistance, use hot-dip galvanised or stainless steel. Stainless is the safer choice with oak, sweet chestnut and cedar, whose tannins attack ordinary steel. Our guide to the best timber for a treehouse explains why.

Fixings to Avoid

  • Lots of nails or small screws into the tree. Each one is a wound, and they rarely hold well under the movement a treehouse sees.
  • Beams bolted tight against the trunk with no space to grow
  • Threaded rod drilled right through the trunk to clamp beams on either side. It’s widely discouraged by specialist suppliers for treehouse loads.
  • Clamping rings or collars tightened around the trunk
  • Rope, wire or chain wrapped around limbs
  • Indoor or plain steel fixings outdoors

Fun Accessories

Popular treehouse accessories include:

  • Rope ladders, cargo nets and climbing walls
  • Slides and fireman’s poles
  • Pulley-and-bucket systems for hauling things up
  • Swings, including rope, disc and nest swings
  • Flags, telescopes and periscopes
  • Solar-powered lights or battery lanterns
  • Fold-down benches and tables
  • Zip lines (sometimes called flying foxes). These need careful design and are best bought as a complete, load-rated kit with clear installation instructions.

For anything climbable, think about falls: keep heights modest for young children and put a deep layer of bark chips or similar underneath. Our guide to how high a treehouse should be covers fall heights, and treehouse railings covers edge protection.

Hanging a Swing Safely

Swings put repeated, shifting loads on their fixings. A few principles:

  • Hang from a beam or purpose-made bracket, not from a thin limb. If you hang from a living branch, use a wide sling or a fixing designed for trees rather than tying rope around the bark.
  • Use swing hangers rated for the job. Hangers with a bearing or bushing reduce wear on rope and fixings.
  • Leave plenty of clearance to the trunk, posts, ladder and anything else a swinging child could hit.
  • Check ropes, chains and fixings regularly for fraying, wear or loosening, and replace worn parts.

Buying Treehouse Fixings in the UK, Ireland and Canada

Specialist treehouse hardware is a niche product, so the choice of suppliers is smaller than for general building hardware.

UK: General fixings (coach bolts, structural screws, hangers and post bases) are easy to find at builders’ merchants and DIY stores. Specialist tree bolts and brackets are sold by a small number of UK suppliers and treehouse builders, and some European manufacturers ship to the UK. Allow for import costs and delivery times.

Ireland: General hardware is available locally. Specialist tree bolts are often bought from suppliers elsewhere in the EU, which avoids customs complications that can apply to orders from outside the EU.

Canada: Many Canadian builders order specialist hardware from US treehouse suppliers, so check shipping, duties and exchange rates. General fixings are easy to find locally.

Wherever you buy, check that load ratings and installation instructions are provided, and keep them with your plans. For the full list of materials and tools for a build, see what you need to build a treehouse.

The complete guide to design and building

How to Design and Build a Beautiful Treehouse
Read the guide

Keep exploring

Guides from other topics

All topics →