Design and Building

How to Make a Model Tree House

How to make a model tree house for a school project, craft or real-build planning: materials, making the tree, scale, step-by-step assembly and finishing details.

On this page
  1. Two Reasons to Make a Model Tree House
  2. What You’ll Need
  3. Choosing a Scale
  4. Making the Tree
  5. Building the Treehouse Step by Step
  6. Details That Bring It to Life
  7. Using a Model to Plan a Real Treehouse
  8. From Model to Real Build

Two Reasons to Make a Model Tree House

People make model tree houses for two quite different reasons:

  1. As a craft or school project. The goal is something that looks great and is fun to make. Lolly sticks, twigs, cardboard and glue are all you need.
  2. As a design model for a real treehouse. The goal is to test proportions, layout and access before buying any timber. Accuracy matters more than finish.

This guide covers both. The basic steps are the same.

What You’ll Need

Base and tree:

  • A sturdy base such as thick cardboard, foam board or a piece of plywood
  • A real branch, florist’s wire or garden wire, or a cardboard tube for the trunk
  • Masking tape, newspaper or papier-mâché paste, or modelling clay to shape the trunk

Treehouse:

  • Lolly sticks (craft sticks), coffee stirrers or balsa wood strips
  • Thin twigs for posts, railings and a ladder
  • Cardboard for walls and roof
  • String or twine for rope ladders and swings

Tools and finishing:

  • PVA glue, plus a hot glue gun if an adult is helping. Hot glue sets fast but can burn
  • Scissors and a craft knife (adult use)
  • A ruler and pencil
  • Paint, moss, dried leaves or green tissue paper for the canopy

Choosing a Scale

For a craft model, choose whatever size fits your base, and around 30–40 cm (12–16 in) tall is a manageable size.

For a design model, pick a real scale so you can measure from it:

  • 1:20 (5 cm on the model = 1 m in reality) gives a model large enough to see detail
  • 1:50 (2 cm = 1 m) is better for showing the whole tree and garden

Using metric scales makes the maths easy. Measure your real tree’s trunk diameter, the heights of the main branches and the spacing of nearby trees, and scale them down.

Making the Tree

Option 1: A Real Branch

A forked branch, pushed firmly into a lump of air-drying clay or screwed to a wooden base, makes a very realistic tree. Choose one with a natural fork at the height where the treehouse will sit. Let it dry fully before gluing anything to it.

Option 2: Wire and Paper

Twist a bundle of wire strands together to make the trunk, then splay them out at the top to form branches. Wrap the wire in masking tape, then cover it in papier-mâché or air-drying clay. Once dry, paint it brown and dry-brush a lighter colour over the top to bring out the bark texture. This method lets you shape the tree to match a real one.

Option 3: Cardboard Tube Trunk

A kitchen roll or postal tube makes a quick trunk. Cut slits at the top and fold strips outwards for branches, or glue on rolled-paper branches. Texture it with crumpled paper and paint. It’s the fastest option, and good for younger children.

Building the Treehouse Step by Step

  1. Make the platform. Glue lolly sticks side by side onto two or three “joists” (more sticks laid crossways underneath). Cut a notch or hole for the trunk to pass through, with a small gap, just as you would on a real build.
  2. Add supports. Glue the platform to the tree, and add twig “knee braces” running from the trunk up to the underside of the platform corners. They make it stronger and look realistic.
  3. Build the walls. Cut cardboard walls, cut out windows and a door, then cover them in lolly sticks or strips of balsa to look like timber cladding. Glue the walls to the platform.
  4. Add the roof. A simple pitched roof is two pieces of cardboard leaning together, supported on a triangle of card at each end. Cover it with overlapping strips of card to look like shingles, or with corrugated card for a metal-roof look.
  5. Add railings. Glue small twig posts around any open deck, then glue thin twigs or cocktail sticks between them as balusters.
  6. Add access. Make a ladder from two long twigs with short twig rungs, or a rope ladder from string and matchsticks.
  7. Make the canopy. Glue moss, dried leaves, green tissue paper or model-railway foliage to the branches. Leave gaps so the treehouse is still visible.
  8. Finish the base. Paint it green or brown, then add grass, gravel or a path.

Details That Bring It to Life

  • A rope swing hanging from a branch
  • A pulley and bucket made from a bead and a bottle cap
  • A rope bridge to a second, smaller platform
  • Fairy lights made from a battery-powered LED string (adult supervision)
  • A flag on the roof, or a tiny sign with the treehouse’s name
  • Figures to show the scale

Using a Model to Plan a Real Treehouse

A rough scale model can save real money and mistakes. It helps you:

  • Check proportions. Is the cabin too big for the tree? Our guide on how to design and build a beautiful treehouse explains why proportion matters.
  • Find clashes between the structure and branches you want to keep
  • Test access routes, such as where a ladder or spiral stair around the trunk would actually land
  • Look at views and privacy from the windows, including how much the treehouse overlooks neighbours
  • Explain the design to family, neighbours or a planning officer

For this kind of model, rough card and tape are fine. Accuracy matters more than finish.

From Model to Real Build

If your model has inspired a real project, these guides will help:

The complete guide to design and building

How to Design and Build a Beautiful Treehouse
Read the guide

Keep exploring

Guides from other topics

All topics →